XR1200 Owners Group banner
13241 - 13260 of 13284 Posts

· Premium Member
Joined
·
2,082 Posts
Slid the front turn signals up the forks. Looks better higher, than at the lower of the triples.

Vehicle Fuel tank Automotive lighting Motorcycle Automotive tire

Fuel tank Automotive fuel system Wheel Tire Automotive lighting
 

· Premium Member
Joined
·
2,082 Posts
That looks much better, if it were mine I would black out that steering damper mount to balance the look :cool:
I agree, but haven’t looked into a black mount.
 

· Registered
Joined
·
63 Posts
Tire Wheel Vehicle Motor vehicle Automotive tire
Tire Wheel Automotive tire Tread Automotive lighting
Automotive lighting Automotive tire Motorcycle Vehicle Hood

Automotive tail & brake light Automotive tire Vehicle registration plate Automotive lighting Vehicle


Got the ride back from Corsa Motoworks, Clearwater, FL (https://www.corsamotoworks.com) in September. They were referred to me by Fast Bike Industries. These are the first pic's I have posted since getting the bike in Aug 2022.
Corsa Work:
Andreani - front end inserts with RaceTech seals (https://fastbikeindustries.com/) Ditched the rusted dustcover cap (Geno Mode)
Nitron NTR3 3 way adjustable suspension-Rear - custom order to any size (I went 16") (https://fastbikeindustries.com/)
Break Tech Rotors - semi floating 320mm (Front Brake Rotors Part Number BT-HD32B.KS)
Vesrha Sport HH+ Kurvey Girl (Product Result)
Dunlop - Sport Max Road Master IV - front and rear
Galfer steel braided break lines

I cannot write enough about how great is was to work with Corsa Motorworks. Mike took the time to re-research and verify everything we did to the bike and left nothing to chance at my suggestions and at my cost. Laid Back Very Cool and professional. When picking the bike up his Tech spent an hour with me making adjustments and fitting the bike to my size and my riding style. I look forward to going back to Clearwater for their
"Track Days" ( https://www.corsamotoworks.com/eventslist).

Also, cannot thank those of YOU enough who have helped me figure out this build and advised.

Respectfully -Rich Barker - Jacksonville (P.S. - This project is out of Money and need to ride the wheel off it now)

OUT
 

· Administrator
Joined
·
8,790 Posts
Well Done barker!
that’s one good looking XR1200, love the license plate!
glad you had good results from Corsa, I was down there last month for the Hurricane Ian, it wasn’t fun, hope you guys made it through OK.
Regards
Roy
 

· Let's Ride
Joined
·
697 Posts
View attachment 253572 View attachment 253573 View attachment 253574
View attachment 253575

Got the ride back from Corsa Motoworks, Clearwater, FL (https://www.corsamotoworks.com) in September. They were referred to me by Fast Bike Industries. These are the first pic's I have posted since getting the bike in Aug 2022.
Corsa Work:
Andreani - front end inserts with RaceTech seals (https://fastbikeindustries.com/) Ditched the rusted dustcover cap (Geno Mode)
Nitron NTR3 3 way adjustable suspension-Rear - custom order to any size (I went 16") (https://fastbikeindustries.com/)
Break Tech Rotors - semi floating 320mm (Front Brake Rotors Part Number BT-HD32B.KS)
Vesrha Sport HH+ Kurvey Girl (Product Result)
Dunlop - Sport Max Road Master IV - front and rear
Galfer steel braided break lines

I cannot write enough about how great is was to work with Corsa Motorworks. Mike took the time to re-research and verify everything we did to the bike and left nothing to chance at my suggestions and at my cost. Laid Back Very Cool and professional. When picking the bike up his Tech spent an hour with me making adjustments and fitting the bike to my size and my riding style. I look forward to going back to Clearwater for their
"Track Days" ( https://www.corsamotoworks.com/eventslist).

Also, cannot thank those of YOU enough who have helped me figure out this build and advised.

Respectfully -Rich Barker - Jacksonville (P.S. - This project is out of Money and need to ride the wheel off it now)

OUT

Nice looking bike. I have the same front rotors, love'um, they work great but don't be surprised if they start rattling later on. Be sure to check your calendar for May of 2023 for the East Coast Ride.
 

· Registered
Joined
·
63 Posts
Well Done barker!
that’s one good looking XR1200, love the license plate!
glad you had good results from Corsa, I was down there last month for the Hurricane Ian, it wasn’t fun, hope you guys made it through OK.
Regards
Roy
Thank You - Yes - I hate to write it - Jacksonville does real well with the storms (been here 20 years). With that written well get leveled next year.
 

· Registered
Joined
·
63 Posts
Nice looking bike. I have the same front rotors, love'um, they work great but don't be surprised if they start rattling later on. Be sure to check your calendar for May of 2023 for the East Coast Ride.
Thank You ! Rattling - oh no (I am sure theres a fix lol/uggg)- but those stock 10 year old guts were SHOT. What Calendar and how to I get the information on the East Coast Ride ?
 

· Let's Ride
Joined
·
697 Posts
Thank You ! Rattling - oh no (I am sure theres a fix lol/uggg)- but those stock 10 year old guts were SHOT. What Calendar and how to I get the information on the East Coast Ride ?
I contacted "Brake Tech" about the rattling rotors and he sent me some wavy/spring washers to fix the rattling rotors. They worked for a while, but went back to rattling. It's not a big deal to me (and may not be for you) because the brakes work so well. Just wanted to let you know.
Sorry, I meant for you to put a check on your calendar. Do a search for East Coast ride/meetup. There is a East Coast ride and a West Coast ride, hopefully, every year. East, we meet in Waynesville, NC the week before Memorial day. Ride for about 4 days on some of the best roads in the area. So much fun.
 

· Registered
Joined
·
63 Posts
I contacted "Brake Tech" about the rattling rotors and he sent me some wavy/spring washers to fix the rattling rotors. They worked for a while, but went back to rattling. It's not a big deal to me (and may not be for you) because the brakes work so well. Just wanted to let you know.
Sorry, I meant for you to put a check on your calendar. Do a search for East Coast ride/meetup. There is a East Coast ride and a West Coast ride, hopefully, every year. East, we meet in Waynesville, NC the week before Memorial day. Ride for about 4 days on some of the best roads in the area. So much fun.
NICE - Thank You
 
13241 - 13260 of 13284 Posts
Top